RYG16T:
DIN Rail Installation
Advanced pre-setting one week before
Latest techbology COMS quatrz Mico-controller
Digital electronics general purpose time switch with daily and
weekly programs
Repeat programs with 8 ON/OFF settings
To-the-minute setting accuracy
LCD displays real time to Hour/Minute and ON/AUTO/OFF
TECHNICAL DATA: |
Voltage limit: AC180V-264V(50/60Hz) | Number of circuits: 1c |
Hysteresis1s/d(at25℃) | Load capacity: 16A 250VAC(ohmic load cos=1) |
On/Off operation: 8on&8off | Service life: Mechanically: 107 Electrically: 107 |
Weight: Approx 150g | Ambient temperature 10-55℃ |
Display: LCD | Storage temperature: 20-70 ℃ |
Battery backup: 150h | Power consumption: 5VA |
|
OPERATING INSTRUCTION: |
1.Firsr time use this timer swich,please input AC and let battery
recharge.after then press reset key. |
| 2.At first time,timer swich is in 24h mode.If you you want change
to 12h mode please press on " "key 5 sce and LCD will display AM If
you want rechang to 24h mode,and press on " "key 5 sce to return. |
| 3.Programming: |
Step | Key | Programming | 1 | Press P | Setting 1 ON time (display 1 on) | 2* | Press D+ | Select days of week (If you want same set in every day,you need not
press this key) | 3 | Press H+/M+ | Set hours and minutes | 4 | Press P | Setting 1 off time (display 1 off) | 5 | Press D+ | Select days of week (If you want same set in every day,you need not
press this key) | 6 | Press H+/M+ | Set hours and minutes | 7 | Repeat step 2-6 | Set 2-8 on/off time | 8** | Press | End |
|
| For cancel engagements,press "MANUAL" then " --:--" is displayed on
LCD to confirm cancel.May press "MANUAL" again to resume initial
stting. |
| *10 deferent mode:(1.MO 2.TU 3.WE 4.TH 5.FR 6.SA 7.SU 8.MO TU WE TH
FR 9. SA SU 10.MO TU WE TH FR SA SU) |
| **IF you need not 8 time setting press " " key to the end |
4.CLOCK SETTING |
| (1)Press " " and "D+" together till correct data is shown |
| (2)Press " " and "H+" together till correct hour is shown |
| (3)Press " " and "M+" together till correct min is shown |
| (4)Press "MANUAL" key to display ON AUTO or AUTO OFF.(If this colck
in your program is ON selcts ON AUTO,and this clock in your program
is OFF selects AUTO OFF) |
| 5.If you always want to use time switch ON or OFF,Please Press
"MANUAL" key to display "ON" or "OFF" |
| NOTE: |
THE POWER CONSUMPTION OF CONNECTED ELECTRICAL APPLIANCES,SHALL BE
WITHIN.
THE LIMITAION OF FOLLOWING RATED CAPACITY. |
